Safe Quality Foods (SQF) Institute defines air quality in its SQF Code – 8th Edition, Section 9.5.6.1-2 as Compressed air used in the production process shall be clean and present no risk to food safety; Compressed air used in the production process shall be regularly monitored for purity.
Contamination in compressed air systems can come from many sources. Dust particles, hydro-carbons and humidity are collected from the environment and concentrated by the air compressor. Oil aerosols from the compressor lubricant and rust particles from the piping can break free and enter the compressed air stream. If these contaminants are not removed, there can be negative impacts on processing systems, food safety and quality. There are several Good Manufacturing Practices (GMPs) published to ensure superior air quality. One of the most important GMPs relates to adequate point-of-use filtration. Since contaminant enters the air steam at all points in the process, point-of-use filtration ensures that clean, safe air comes in contact with food and food contact areas.
The SQF auditor looks to make sure manufacturers have the proper point- of-use filtration in place to ensure clean, safe air. That means that the air coming in contact with food or food contact surfaces should present no risk to food safety. Using sterile grade air is one of the most effective ways of reducing food safety risk. Every compressed air installation needs to ensure removal of particulate and coalescing contaminants down to a safe level. Donaldson has three filter combinations outlined below that meet the SQF air quality standard. Monitor your compressed air line regularly to ensure integrity of the filtration system. By installing proper compressed air filtration at the point-of-use, you will meet or exceed GFSI, CFR Title 21, and the SQF standard for compressed air.
Part Description | Capa-city (SCFM) |
Conne-ction (FNPT) |
Elements | Dimensions (in.) | Part # |
|||||
---|---|---|---|---|---|---|---|---|---|---|
Elem-ent Size | Stage 1 |
Stage 2 |
Stage 3 |
H | W | D | ||||
DF 0035 HOUSING COMBI-NATION |
20 | 1/4 in. | 0035 | V - Coales-cing |
M - Coales-cing | S - SQF Final Element | 9.9 | 9.3 | 3.6 | 1C488580-63 |
DF 0120 HOUSING COMBI-NATION |
70 | 1/2 in. | 0120 | V - Coales-cing | M - Coales-cing | S - SQF Final Element | 13.4 | 11.7 | 5.8 | 1C488581-63 |
DF 0210 HOUSING COMBI-NATION |
123 | 3/4 in. | 0210 | V - Coales-cing | M - Coales-cing | S - SQF Final Element | 15.9 | 15 | 7.9 | 1C488582-63 |
DF 0320 HOUSING COMBI-NATION |
188 | 1 in. | 0320 | V - Coales-cing | M - Coales-cing | S - SQF Final Element | 17.4 | 15.9 | 7.9 | 1C488583-63 |
Consumers are more aware and concerned with food safety than ever before. They expect more from their retailers and food service providers, who in turn expect more from their suppliers. Suppliers must provide verifiable proof that robust food safety control systems have been effectively implemented. As our food supply chain globalized, the demands for global food manufacturing standards grew. SQF was approved by the Global Food Safety Initiative (GFSI) in 2005 to deliver consistent, globally recognized food safety and quality certification programs based on sound scientific principles. Major US retailers began adopting SQF requirements in 2007 which was in turn adopted by global food processors. With the consolidation of standards, food processors can manage their food safety under one quality standard.